Email Address

Phone Number

+91 8291952539 / +91 8149005133

Product Details

SDG Plummer

Shaft dia :- 125 to 530 mm
Material Cast Iron FG 260 – IS 210, 1993(ISO/R 185-1961,Grade 25)
Seal Labyrinth or Felt
Lubrication Grease
Type Horizontal Split Type with end covers and four mounting holes of oval shape.
Application Suitable for very heavy duty services and continuous operation. Widely used steel & cement industry, Ball Mill & crasher application, mining, etc.
Optional Features Available On Request
  • End cover for closed end.
  • Located or non located bearing
  • Material : Cast steel : SDJS

    S. G. Iron : SDJD
  • V-Seal as supplementary seal.
    • For bearings with withdrawal sleeve:SDGC3100 D
    • For bearing with Cylindrical bore on stepped cyl shaff: SDGC3100 G
    • For bearing with adapter sleeve for stepped shaft:SDGC 3100 C
  • Water Jacketed SDG 3100 WJ housings are available for high temperature application.
  • SDG housing are available for following series of bearings also: 3900,4000,4100

    39/500,530, 560, 600, 630, 670, 710

    40/500, 530, 560, 600, 630

    41/500, 530,560.
  • SDG housing are available for bearings with cylindrical bore.
  • For bearing housings where strength of grey Cast Iron material is still inadequate, these housings can also be supplied in cast steel or Spheroidal Graphite Iron (ductile). Such bearing housings can support approximately twice the load permitted for grey cast iron housings.
  • These bearing housings are dimensionally inter changeable and suitable to bearings of international make like SKF, FAG, NTN,ZKL,TIMKEN, etc.
  • For SDG type it is necessary to specify requirement for located Bearing type or non-located Bearing type because loose Locating Rings (FRB) are not used. Instead, the bearing width inside the housing is machined to suit located or non-located type. Put suffix as under to indicate this requirement :
    • BL : Housing for thru’ shaft & Non locating bearing
    • BF : Housing for thru’ shaft & locating bearing
    • AL : Housing for shaft end (with end cover) & Non-locating bearing
    • AF : Housing for shaft end (with end cover) & Locating bearing