Email Address

Phone Number

+91 8291952539 / +91 8149005133

Product Details

THD Take-up

Shaft dia :- 50 to 530 mm
Material Cast steel grade 280/520, IS 1030-1989(ISO/R 185,Grade 230-450 SC 460)
Seal Labyrinth
Lubrication Grease
Type Non-Split type with end covers
Application Conveyor, Belt tightening pulley
Optional Features Available On Request
  • BL, BF, AL or AF
  • Closed end or open end.
  • Material : Cast steel : THDC

    S. G. Iron : THDD
  • THD Housing are also available for bearing with cylindrical bore.
  • For bearing housings where strength of grey Cast Iron material is still inadequate, these housings can also be supplied in cast steel or Spheroidal Graphite Iron (ductile). Such bearing housings can support approximately twice the load permitted for grey cast iron housings.
  • These bearing housings are dimensionally inter changeable and suitable to bearings of international make like SKF, FAG, NTN, ZKL, TIMKEN, etc.
  • For THD type it is necessary to specify requirement for located Bearing type or non-located Bearing type because loose Locating Rings (FRB) are not used. Instead, the bearing width inside the housing is machined to suit located or non-located type. Put suffix as under to indicate this requirement :
    • BL : Housing for thru’ shaft & Non locating bearing
    • BF : Housing for thru’ shaft & locating bearing
    • AL : Housing for shaft end (with end cover) & Non-locating bearing
    • AF : Housing for shaft end (with end cover) & Locating bearing